D50 HALL EFFECT HIGH LINEARITY 0.1% 1000A AC/DC CURRENT CLAMP

>Product>Current Probe>AC/DC Current Clamp>Hall Effect High Linearity 0.1% 1000a Ac/Dc Current Clamp

D50HALL EFFECT HIGH LINEARITY 0.1% 1000A AC/DC CURRENT CLAMP

The round jaw design on the D50 series hall effect current clamp along with the high content permalloy core makes them well suited for power quality applications where high linearity and low phase shift along with wide frequency are important from 10Hz to 200kHz. Measurement range is 0 to 500A or 0 to 1000A AC/DC. It designed for oscilloscopes, power quality analyzer, waveform displaying instruments, and other frequency sensitive displaying instruments with BNC inputs.
The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional 1V or 2V output for direct readings on oscilloscopes from DC to 1MHz at -3dB. The D50 is power by a rechargeable multimeter battery or from a 5V or 9 V DC power signal cable. It is the perfect tool for most of the waveform displaying instruments.

Request a quote Download Catalogue video

APPLICATION

■ Multimeter;

■ Power meter;

■ Cable fault analysis;

■ Large industrial loads;

■ Power load monitoring;

■ Energy meter calibrator;

■ Data logging/recording;

■ Power quality monitoring;

■ Power quality analyzer(PQA);

■ Power and harmonic meters;

■ Measuring around cable bundles;

■ Waveform analysis(oscilloscopes meter);

FEATURES

■ UL, CE CNAS mark;

■ High content permalloy core;

■ Holding wire diameter: φ52mm;

■ Frequency 10Hz-1MHz Bandwidth;

■ Conforms to EN 61010, 600V CAT III;

■ Industrial design & beautiful appearance;

■ Low phase shift for power measurement;

■ Frequency response from DC to 200 KHz;

■ Measurement range 0-500A/0-1000 AC/DC;

■ Improved ergonomic design & easy operation;

■ High precision 0.5% for DC current measurement;

■ Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

PARAMETERS

Electrical parameters
Ratio	1000: 1 , 2000:1 (customized)
Accuracy class	0.2%, 0.5%, 1%, 2%
Primary current	0 - 500A or 0-1000A AC/DC
Signal output	1mV/A, 10mV/A
Secondary voltage	0 - 1V or 0 - 2V AC/DC
Max. Cont. Input current	1200A AC/DC
Load capacity	≤20Ω, standard 4Ω
Over voltage category	CAT III 600V
Linearity	0.1%
Frequency range	10Hz-1MHz
Frequency response time	≤10us
Phase Shift at 50/60Hz	±1°
Dielectric strength	3KV 50Hz/60Hz at 1minute
Temperature range	-40°C to +55°C
Output	2.5 meter cable with D01 or BNC connector
Max. voltage not insulated conductors	720 V
Power supply	5V or 9V DC
Standard	EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III
Installation	clamp type
Range	10A, 100A, 1000A optional
Output mode	lead output(2.5m)
Pollution Degree	2
Protection	IP40
Connector	BNC, 4mm banana, signal cable(4 cores),customized
Mechanical parameters
Dimensions (L x W x H) (mm)	105 x 218 x 30
Weight (g)	650
Holding wire diameter (mm)	φ52
Max. jaw opening (mm)	52
Jaw color	Red & Grey
Material	PC+ABS, UL94 V0